Coachbuilder's 1.25" Carrier Bearing Drop Kit helps correct driveline angles on '07-21 Tundras with 3-4" of lift.

• The Carrier Bearing drop kit will install between the frame support and the top side of the carrier bearing (located at the center of the rear driveline.) Hardware is included with this kit. Torque spec is 25 ft lbs. and should be torqued with the truck on the ground.

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.