Upgrade Your BDS 4.5 -7" / Fabtech 6" / ProComp 6"-7" / Zone 5" lift lit.
Coachbuilder Steering Kits are made from top quality components including 7075 Billet w/Hard Anodized Finish, 7/8″ Heat Treated 4130 Chromoly Rod End, PTFE Inserts, 303 Stainless misalignment shims, and hardened hardware. Coachbuilder Steering kits available for all Tundra applications and must be running at least a 18″ wheel with a +35 mm offset or less, 20″ or larger wheels work with any offset.

**Does require modification of Steering knuckle... ( Drill Bit included ).  Installs in 45-60 minutes.

PLEASE NOTE: If the BDS or PROCOMP lift was installed in 2010 or earlier please use the OE Replacement Kit

• Alignment specs after install:
  
  Camber: +.2 degrees per side
  Caster: +2.2 - 2.5 degrees per side
  Toe: +.07 - .10 degrees per side, not to exceed +.20 degrees combined
  
  
  

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.