Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!

SAE Driving is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional "spot" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.

SAE Fog provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose your output color of cool white or yellow, which is often said to help cut through inclement weather.

Sport or Pro. Stage Series LED pods are available at two different power levels. Both options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. However, the Pro option is double the amount of total power.

• Beam Angle: Driving, 20°x8°, Fog, 80°x8°
  Power (watts): Sport: 14.5, Pro: 36
  Operating Voltage: 9-16V
  Current (amps @ 13.2V): Sport: 1.1, Pro: 2.7
  Polarity: Polarity Specific
  Operating Temperature: -40C to 85C (-40F to 185F)
  LED Emitter: Luxeon Z ES, Cree XP-L HI
  Connector(s): Deutsch DT Input Driver
  Features: Constant Current
  Materials: Polycarbonate Lens, Aluminum Casting, Rubber Gasket
  Cooling: Passive, Pin-Fin heatsink
  Compliance Ratings: SAE J575 Durability Test
  Intrusion Ratings: IP67 Weatherproof

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.