PRP’s Belt Changing Tool for Polaris RZR 570, 800, XP900 & XP1000’s makes it quick and easy to change the belt on your Polaris RZR. Rather than use a wrench to hold open the secondary clutch, our simple tool ‘locks’ the clutch open the entire time. Just insert the tool, tighten down the bolt, and leave it in place while you change the belt.

• Instructions: Insert either the wide or skinny side of the belt changing tool into the secondary clutch release assembly, according to your vehicle year – (2011+ XP 900, 2014-15 XP 1000) use Skinny Side / (2016+ XP 1000) use Wide Side. Insert the bolt into the tool, insert the tool into the clutch, and use a 1/2″ socket or impact gun to tighten down the bolt. This will compress the clutch lever and allow you to change the belt. The tool stays locked in place the entire time, so you can use both hands to change the belt. When finished, loosen the bolt, and remove the Belt Changing Tool.

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.